What is needed, and how to use NPS
Below we start to describe what you need and how to use NPS for cars and motorbikes. Then we have a section for trucks & buses. Large engines/ vessels you will find at the bottom of this text.
General rules: Have a pre-warm engine, shake bottle 20 seconds, pour in first half, drive a couple of hours or more, change oil filter and pour in last part of bottle. Drive a small trip, and ready!
Purchase the NPS Engine Improvement here, for engines with up to 45 L oil only, but this is a very big truck.
Using NPS Engine Improvement in your Car or Van. What is needed?
* For Car or Van engines with oil capacity of up to 5L (1x Part nr. NP5)
* Add product for Manual Gearbox with oil capacity up to 3L (1x Part nr. MT3) or
* Add product for Automatic Gearbox with oil capacity up to 3L (1x Part nr. AT3)
* Can also apply for motorcycles (wet clutch)
It is not necessary to change the oil unless it is in very poor condition. However, a simple way to approach the treatment is to perform the first application just before a service is due. This will ensure that both the oil filter and oil itself is changed between the first and second application, removing any dirt deposited from the cleaning process.
How to apply for cars/ bikes? Shake the bottle vigorously for 20 secs before usage!
Stage 1) Pour approxomately half the bottle into the oil top-up cap of a pre-warmed engine. Important: Perform this application after idling 10 mins OR after driving), then Idle the engine for 5-10 minutes before you drive 100 km (approx. 60 miles).
Stage 2) Change the oil filter (not compulsory but highly recomended particularly if nearing a required oil change, as the sediments from the systematic cleaning of the engine will be deposited in the filter).
Stage 3) Idle the engine for 3 minutes. Shake the bottle again for 20 seconds, and pour the rest of the bottle in into the oil top-up cap of the pre-warmed engine.
Stage 4) Change the Oil filter (this will have been done if you applied the first half of the bottle before a regular service).
The NPS Engine Improvement will complete formation over the next 75 to 100 km, after which the effects will be stabilized and the permenant protection layered permenantly bonded to the engine surfaces.
Gearbox treatment: Pre-warm the oil through normal driving. Stir and shake the bottle vigorously for 20 secs before usage. Pour the bottle into the gearbox. Drive a short trip and you are ready!
Differential Treatment: Same as for gearbox treatment!
NPS Engine Improvement in Trucks and Buses. What is needed?
* Find out how much oil you have in the machine and in the gear-box.
* Choose the product that match the size of engine and gear in the Webshop. Click here.
Engine Treatment: Mostly the same procedures as for car, but you drive longer to mix the particles as it takes more time. We would prefer to help you out with the first vehicle, to make sure you get the right training. We can also bring measuring tools for emission.
Stir and shake the bottle vigorously for 20 secs before usage. Pour 1 bottle into the pre-warmed engine. Idle the engine for 10 minutes, and drive 250 km. Change the oil filter, and pour the second bottle into a pre-warmed engine. Drive a short trip.
The Engine Improvement will complete formation over the next 170-250 km, after which the effects will be stabilized and the permenant protection layered permenantly bonded to the engine surfaces.
NPS Engine Improvement in large machines and vessels
The engines contain from 100 to thousands of litres oil per engine, so NPS Engine Improvement will be customized with a high consentrate of particles per gram.
As an example we will come with 2x 5L concentrate and use a special tool to feed this very slowly into the warm oil.
Please Contact us with your engine spesifications, then we can give you a quote.